Latest Products
The Pixhawk® 6X is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6X Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6X, you can find an STMicroelectronics® based STM32H753, paired with sensor technology from Bosch®, InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.
The Pixhawk® 6X’s H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
The FMUv6X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability. An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY, high-speed communication with mission computers via ethernet is now possible.
The Pixhawk® 6X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application. Holybro offers the Pixhawk Baseboard and the Pixhawk Mini-Baseboard, each with different form factor and interfaces
Specification
Processors & Sensors
FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
Accel/Gyro: ICM-45686 with BalancedGyro™ Technology x3
Barometer: ICP20100
Barometer: BMP388
Mag: BMM150
Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
Telem1 output current limiter: 1.5A
All other port combined output current limiter: 1.5A
Mechanical data
Dimensions
Flight Controller Module: 38.8 x 31.8 x 16.8mm
Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
Flight Controller Module: 31.3g
Standard Baseboard: 72.5g (Aluminum)
Mini Baseboard: 26.5g
SKU 11073 includes:
Pixhawk 6X Flight Controller Module
SKU 20292/SKU 20293 includes:
Pixhawk 6X Flight Controller Module
Pixhawk Standard Base / Pixhawk Mini Base
PM02D HV Power Module(Previously shipped with PM02D-LV)
Cable Set
SKU 20294/20295/20296/20297
Pixhawk 6X Flight Controller Module
Pixhawk Standard Base / Pixhawk Mini Base
PM02D HV Power Module (Previously shipped with PM02D-LV)
Cable Set
M9N/M10 GPS
The Pixhawk® 6X is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6X Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6X, you can find an STMicroelectronics® based STM32H753, paired with sensor technology from Bosch®, InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.
The Pixhawk® 6X’s H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
The FMUv6X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability. An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY, high-speed communication with mission computers via ethernet is now possible.
The Pixhawk® 6X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application. Holybro offers the Pixhawk Baseboard and the Pixhawk Mini-Baseboard, each with different form factor and interfaces
Specification
Processors & Sensors
FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
Accel/Gyro: ICM-45686 with BalancedGyro™ Technology x3
Barometer: ICP20100
Barometer: BMP388
Mag: BMM150
Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
Telem1 output current limiter: 1.5A
All other port combined output current limiter: 1.5A
Mechanical data
Dimensions
Flight Controller Module: 38.8 x 31.8 x 16.8mm
Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
Flight Controller Module: 31.3g
Standard Baseboard: 72.5g (Aluminum)
Mini Baseboard: 26.5g
SKU 11073 includes:
Pixhawk 6X Flight Controller Module
SKU 20292/SKU 20293 includes:
Pixhawk 6X Flight Controller Module
Pixhawk Standard Base / Pixhawk Mini Base
PM02D HV Power Module(Previously shipped with PM02D-LV)
Cable Set
SKU 20294/20295/20296/20297
Pixhawk 6X Flight Controller Module
Pixhawk Standard Base / Pixhawk Mini Base
PM02D HV Power Module (Previously shipped with PM02D-LV)
Cable Set
M9N/M10 GPS
RETURNS POLICY
1. Please contact us first with following information before shipping back:
-order number/contact person
-reason for returning
After confirmed with us, return instructions will be emailed to you.
2. We may require restocking fee(shipping cost) for returned merchandise without any quality problems. A re-stocking fee does not apply to defective products.
3. All merchandise returned must be packaged well to protect it from shipping damage, and must be sent with a shipping method that provides tracking information. We can not be held responsible for damage that occurs in transit.
4. For merchandise that a customer wants to return for a refund, We requires that the item and its packaging be in un-used, "like new" condition with all original packaging, cabling, manuals, etc. included, or the return will be refused. Inspect your product carefully before shipping as any signs of wear or use will result in a refused product return.
Please also include a note about your personal Info and the problems.
1.Your order number/Contact person
2.Your Detailed shipping address
3.why you have to return it?
4.what do you need us to do?
5.which part is broken?
6.Any problem you can find so far with the returned item.
SHIPPING
After order placed, you will receive a confirmation email.Once your order is shipped, you will receive tracking number and link via email.We offer express shipping , battery shipping, drone shipping to all over the world.If you have special declare value, shipping company requirment, please email us: hi@insightfpv.com
