030: PL - 2x 200A PDB / 10AWG

All-in-one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via an adapter cable. With an integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC, and most importantly a main power switch with an continuous current of 400A. The outputs are over 3.5mm banana connectors, plus spare BEC connectors after the switch and before the switch.
This design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.
Less wiring = Cleaner builds
Protect your ESC’s and other equipment due to smooth power-up from GND.
Recommended maximum AUW of UAV = 50kg.
Specifications:
Input 2x 4-14S (absolute max.60V) with transient spikes of max. 65V.
2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.
Hub X2 can be deactivated for single battery usage.
5.3V / 3A power supply for Flight Controller
2x 20cm 10AWG input cables (red/black)
Only 75 x 49 x 27mm -> 110g (without cables)
Scope of delivery:
1x PDB with soldered-on input wires (2x 20cm 10AWG)
1x 042: PL – FC cable for Pixhawk 2.1 (The Cube)
20x 3.5mm bullet connectors (male)
2x 26cm Red/Black shrinking tube
2 pairs AMASS / AS150 connector
REM: Delivery without 059: Power-Switch
For more info, please check the manual of the product.
Please allow up to 12 working days for shipment, as this part is made on order.

RETURNS POLICY

1. Please contact us first with following information before shipping back:
-order number/contact person
-reason for returning
After confirmed with us, return instructions will be emailed to you.

2. We may require restocking fee(shipping cost) for returned merchandise without any quality problems. A re-stocking fee does not apply to defective products.

3. All merchandise returned must be packaged well to protect it from shipping damage, and must be sent with a shipping method that provides tracking information. We can not be held responsible for damage that occurs in transit. 
4. For merchandise that a customer wants to return for a refund, We requires that the item and its packaging be in un-used, "like new" condition with all original packaging, cabling, manuals, etc. included, or the return will be refused. Inspect your product carefully before shipping as any signs of wear or use will result in a refused product return.

Please also include a note about your personal Info and the problems.

1.Your order number/Contact person
2.Your Detailed shipping address
3.why you have to return it?
4.what do you need us to do?
5.which part is broken?
6.Any problem you can find so far with the returned item.

SHIPPING

After order placed, you will receive a confirmation email.Once your order is shipped, you will receive tracking number and link via email.We offer express shipping , battery shipping, drone shipping to all over the world.If you have special declare value, shipping company requirment, please email us: hi@insightfpv.com