Herelink1.1 HD Video Transmission System (new v1.1)

Herelink updated points:

1. Screen brightness of controller is improved up from 600nit to 1,000nit.
2. Ethernet port added on the Herelink air unit
3. SD card slot added on the Herelink air unit

Package incloude:

HX4-06211 Herelink Controller Unit
1 x Herelink Controller Unit
2 x Herelink Controller Joystick
1 x Herelink Omni-directional Antenna
1 x Herelink Directional Antenna
1 x Herelink Set up tips card

HX4-06210 Herelink Air Unit
1 x Herelink Air Unit
1 x Herelink Mounting Plate
1 x Herelink Screw Set
1 x Herelink Silicone Ring Set
2 x Herelink Taoglas Antenna
1 x Herelink Fan
1 x Herelink Cable Set
1 x Herelink HDMI Cable
1 x Herelink Set up tips card

Technical specifications:

Hardware information:

Processor: SoC – Pinecone S1
4 large core, Cortex A53, 2.2GHz
4 small core, Cortex A53, 1.4GHz
GPU: 4 core Mali
T860 SDR: A7 + DSP
Storage:
Sky: LPDDR3: 1GB
Ground: LPDDR3: 2GB
Sky / Ground: EMMC: 4GB
Transmission distance: FCC 20km CE / SRRC 12km
Image transmission delay: ≤ 110ms
Image quality: 720p@30fps 1080p@30/60fps
Frequency Band: 2.4GHz ISM
Receive sensitivity: -99dBm@20MHz BW
Interference recovery: < 1s

Controller:

Plastic ergonomic housing
Screen: 5.46 inch, 1080P, 16 million colors, capacitive touch screen
Audio: built-in speaker and microphone
Remote control: 2 rocker dials, 1 scroll wheel, 6 bottom buttons, 1 top button
Communication: BT / WIFI / GPS
2 tri-color indicator light
Interface: MicroUSB, microSD (max. 64GB)
Detachable antennas: 1x omnidirectional (2dBi), 1x directional (5dBi)
Built-in WiFi and GPS antennas
Optional external GPS antenna interface
Power: 4950 mAh LiPo battery
Charging: microUSB port, 5v 2A
Power consumption: < 4W (medium screen brightness, WiFi off, GPS off)
Size: 217 × 106.5 × 31mm (antenna excluded)

Air Unit:

2x micro HDMI input for external cameras
5v~12v 2pin power input interface
3.3v/5v level 3pin UART interface
2x 3.3v level 4pin RC output connectors (S.bus, S.bus inverted, PPM output)
microUSB for upgrades (supports OTG mode)
Frequency and status reset button
2 LED used to indicate the frequency and picture status
2x MMCX antenna jack for signal transmission and ground communication
Signal bandwidth: 10/20MHz
Power consumption: < 4W
Size: 78.5x30x13mm

RETURNS POLICY

1. Please contact us first with following information before shipping back:
-order number/contact person
-reason for returning
After confirmed with us, return instructions will be emailed to you.

2. We may require restocking fee(shipping cost) for returned merchandise without any quality problems. A re-stocking fee does not apply to defective products.

3. All merchandise returned must be packaged well to protect it from shipping damage, and must be sent with a shipping method that provides tracking information. We can not be held responsible for damage that occurs in transit. 
4. For merchandise that a customer wants to return for a refund, We requires that the item and its packaging be in un-used, "like new" condition with all original packaging, cabling, manuals, etc. included, or the return will be refused. Inspect your product carefully before shipping as any signs of wear or use will result in a refused product return.

Please also include a note about your personal Info and the problems.

1.Your order number/Contact person
2.Your Detailed shipping address
3.why you have to return it?
4.what do you need us to do?
5.which part is broken?
6.Any problem you can find so far with the returned item.

SHIPPING

After order placed, you will receive a confirmation email.Once your order is shipped, you will receive tracking number and link via email.We offer express shipping , battery shipping, drone shipping to all over the world.If you have special declare value, shipping company requirment, please email us: hi@insightfpv.com